HP Chromebook 11A G8 EE Palmrest w/Keyboard Touchpad

Product Description

To replace the palmrest on an HP Chromebook 11A G8 EE, follow these steps:

1. Power off the Chromebook and disconnect any external devices or cables.
2. Close the lid and place the Chromebook upside down on a flat surface.
3. Locate the screws on the bottom of the Chromebook that secure the palmrest. There are usually several screws around the edges and possibly some in the middle.
4. Use a small Phillips screwdriver to remove all the screws. Keep them in a safe place.
5. Once all the screws are removed, gently lift the palmrest from the bottom of the Chromebook.
6. Be careful not to pull too hard or force it, as there may be cables or connectors attached to the palmrest.
7. If there are any cables or connectors attached, carefully disconnect them by gently pulling them away from the palmrest. Take note of their positions and how they are connected.
8. Set aside the old palmrest and take the new palmrest.
9. If necessary, reconnect any cables or connectors to the new palmrest in the same positions as before.
10. Align the new palmrest with the Chromebook and carefully press it into place.
11. Once the palmrest is aligned and in place, reinsert and tighten all the screws that were removed earlier.
12. Double-check that all the screws are secure and the palmrest is properly seated.
13. Flip the Chromebook over and open the lid to power it on.
14. Test the functionality of the palmrest, including the touchpad and keyboard, to ensure everything is working correctly.

Note: If you are not confident in performing this task yourself, it is recommended to seek assistance from a professional or authorized service center.

Details information for this part:

Part Number: Upper Case Palmrest with keyboard and touchpad.

Compatible: For HP Chromebook 11A G8 EE Laptop.

Manufacturer part number: L92832-001